 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Turning a Ball & Cup Toss Toy
A Pictorial Article by Bob Hamilton
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tip for assembly: In order to thread the string through the holes in the ball and cup I wet a couple of inches of the end of the string with low viscosity cyanoacrylate glue (Hot Stuff Red Label) and then hit it with a shot of the accelerator. This makes the string stiff and allows me to push it through the holes.